8.2 Add User In Group 1
8.5 Delete All Users in Group 1
8.6 Delete All Users in Group 2
1. Swipe the Master or Admin Finger
twice
2. Swipe the user finger min.
(unl Ok Beep)
6 mes
1. Swipe the Master or Admin finger
,
3 mes
2. Wait
for the light pa ern on figure.4
6 seconds
3. Swipe the Master or Admin finger
once more
Figure.1
Figure.2
6 sec.
6 sec.
8
www.xprgroup.com
1. Swipe the Master or Admin Finger
2. Swipe the user finger min.
(unl Ok Beep)
6 mes
Master Finger x 1
User Finger x 6
8.3 Add User In Group 2
Master Finger x 2
User Finger x 6
8.4 Delete User
Figure.1
1. Swipe the Master or Admin Finger
2. Swipe the user finger (already enrolled)
Master Finger x 1
User Finger x 1
Master Finger x 3
Master Finger x 1
wait 6 seconds
1. Swipe the Master or Admin finger
,
4 mes
2. Wait
for the light pa ern on figure.6
6 seconds
3. Swipe the Master or Admin finger
once more
Master Finger x 4
Master Finger x 1
wait 6 seconds
Note:
All fingers that are enrolled in Group 2 will be deleted.
Note:
All fingers that are enrolled in Group 1 will be deleted.
Important:
When using proximity reader for
Mode, first present the Card then swipe the finger min.
.
Finger Or/And Card
6 mes
When using keypad for
mode first enter the PIN Code, then swipe the finger min.
.
Finger Or/And Pin Code
6 mes
When using Mifare card reader for
Mode first swipe the finger min.
, then present a Card.
Finger On Card
6 mes
For Fast Deleng a user in
mode swipe the Master or Admin finger then present an exisng user card
Finger On Card
With this, the quick programming is completed. The system is now operaonal with default value for Door Open Time of
3
seconds.
For more comprehensive programming, refer to the “
” secon.
B100PAD-SA Programming
If you make any mistake or you just simply want to
Quick Programming, wait for the meout of
.
exit
10 seconds
Figure.4
Figure.6
1.
Press
2.
2.
Press
or
to select
or
1
2
Relay1
Relay2
To Exit press 0, A
3.
Table1.
Select the me code from the
Time Codes
Time Mode
1
1 sec
2
3 sec
3
5 sec
4
10 sec
5
20 sec
6
30 sec
7
60 sec
8
Toggle
Table1.
4.
Press
to confirm.
A
11.6 Set Door Relay Time
11.0 P
B100PAD-SA
K
ROGRAMING
WITH
EYPAD
13
www.xprgroup.com
1
2
3
4
5
6
7
8
9
A
0
B
Swipe Master/Admin finger or enter Admin PIN.
The Biometric reader starts to blink.
BL
BL
ADMIN PIN or
x 5
Example:
Task: Put Relay1 to stay acvated 10 seconds.
Scroll Master Finger 5 mes, press 2, press 1, press 4, press A, press 0,A to exit.
