background image

English - 2

Safety Instructions

!

WARNING - READ AND SAVE THIS INSTRUCTION BEFORE USING THIS PRODUCT.

The user of electrical products may create hazards that include, but are not limited to 

injury, fire, electrical shock. Failure to follow these instructions may damage and/or 

impair its operation and void the warranty.

 Before operating, remove all packaging material and check for any damage that may 

have occurred during shipping or any missing items.

 Check household power supply to ensure it matches the appliance’s specification.

 

DO NOT

 operate any fan with a damaged cord or plug. Discard fan or return it to an 

authorized service facility for examination and/or repair.

 Use only on GFCI protected receptacles. Please contact a qualified electrician for 

verification and / or installation of a GFCI receptacle if necessary.

 

DO NOT

 run cord under carpeting. 

DO NOT

 cover cord with throw rugs, runners, or 

similar coverings. 

DO NOT

 route cord under furniture or appliances. Arrange cord away 

from traffic area and where it will not be tripped over.

 Suitable for use with solid state speed control.

 

DO NOT

 touch this appliance or the plug with wet hands or while standing in water.

 

DO NOT

 operate the appliance in any pooled water. 

 

DO NOT

 use the product in areas where gasoline, paint or other flammable goods and 

objects are used or stored.

 

DO NOT

 insert or allow objects to enter any ventilation or exhaust opening as this may 

damage the appliance and void the warranty.

 

DO NOT

 cover the air inlet or outlet on the appliance.

 

DO NOT

 direct the air flow at human faces or bodies.

 

DO NOT

 allow children to play with this appliance.

 

AUTOMATICALLY OPERATED DEVICE 

– To reduce the risk of injury, disconnect from 

power supply before servicing.

 Remove the power cord from the electrical receptacle by grasping and pulling on the 

power cord plug-end only, 

DO NOT

 pull the cord directly.

 

DO NOT

 attempt to repair or adjust any electrical or mechanical functions of this 

appliance, as this may cause danger and void the warranty.

 If the appliance is damaged or it malfunctions, 

DO NOT

 continue to use it. Unplug the 

product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.

 Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, 

or other extreme environments, when not in use.

 

DO NOT

 stack more than five units of this appliance.

 An electronic instruction manual can be obtained through manufacturer’s website 

www.xpower.com.

Summary of Contents for X-47ATR

















Reviews: