- 11 -
4. Istruzioni per l’installazione e l’utilizzo
4.3 utilizzo
4.3.2 passaggi operativi
4.3.1 prima dell’utilizzo
1. verificare che la corrente in entrata e che l’ambiente in cui è installato l’inverter siano compatibili con le condizioni d’utilizzo.
2.verificare che il sensore di pressione sia collegato al sistema.
3. assicurarsi che tutti i collegamenti siano completamente serrati.
4.Se la pompa sta andando senza acqua dopo che tutte le connessioni sono state effettuate e la pompa è trifase, verificare che
il senso di rotazione del motore sia corretto. Se il motore ruota al contrario, scambiate le connessioni dei terminali UV, WF oppure
WU oppure invertitelo con l’apposito interruttore.
1. Quando si collega la corrente, la spia di accensione si accenderà e il display della pressione segnerà 00.00 Bar.
2. Aprite le valvole di mandata e premere il pulsante RUN e avviate la pompa
3. si può premere STO in qualunque momento per arrestare la pompa
4. Premere oppure per impostare la pressione di funzionamento.
Premere per aumentare la pressione impostata per diminuirla.
5. aprite il rubinetto dopo aver regolato la pressione e l’inverter regolerà la velocità della pompa a seconda dell’utilizzo dell’acqua.
Se la pompa funziona normalmente e la pressione indicata sul display è costante, l’installazione è completata.
I