XPower BR-272A, Owner'S Manual

Page: 4 / 9

- 7 - - 6 -
Safety Instructions
11. Outdoor use: while the blower is being operated outdoors, it must be plugged into a grounded GFCI
outlet only. The motor must be kept dry at all times. If the unit becomes wet, turn the electricity off
and witch the blower in the off position; thoroughly dry the unit before the next operation.
12. Indoor use use only with a grounded plug.
13. Never use a cord that has cuts, breaks, or any other apparent damage as harmful, electrical shock may
occur.
14. Make sure the power source is sufficient to meet the requirements of the blower (see Specifications ).
15. Keep air intakes and exhausts clean at all times to avoid clogging or blocking which will cause electrical
hazards, overheating or fire.
16. To avoid objects from coming in contact with the blower fan or injury to persons, do not remove any
screens or safety guards from the unit. Damage in this manner will void your warranty.
17. Do not use any form of speed control device as doing so will void your warranty and may risk injury or
fire.
18. Always place the blower on a smooth and level surface for safe operation.
19. Do not use the unit if defective or damaged.
20. Unplug the unit before maintenance, cleaning or servicing.
21. The blower and inflatable in operation must be supervised at all times.
22. Any misuse or abuse of this product will void your warranty.
GROUNDING
PIN
Grounding methods
METAL SCREW
OUTLET BOX
COVER OF GROUNDED
(A)
Grounding Instructions:
This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electric shock by proving an escape wire for electric current. This product is equipped with a cord having
a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING - Improper installation of the grounding plug is able to result in a risk of electric shock. When
repair or replacement of the cord or plug is required, do not connect the grounding wire to either flat blade
pin. The wire coated and insulated in green is the the grounding wire. Check with a qualified electrician
when you don't completely understand or have a problem to follow this instruction. Do not modify the
original plug. If it does not fit your outlet, have the proper outlet installed by a qualified electrician.
This appliance is designed to use on a nominal
120V circuit, and has a grounding plug that
looks like the plug illustrated in Figure (A).
Only connect the product to an outlet having
the same configuration as the plug. Do no use
an adapter with this product.