https://www.XPOtool.com
Item 61491
Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for purchasing this quality product.
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Information on use
•
To use this lifter, turn the valve knob clockwise. Pull and push the handle for ease of use.
•
Any position from horizontal to vertical can be used, but the pipe must always point downwards.
If necessary, the supplied accessories can be attached to the tool.
•
To lower the jack, turn the valve knob counter-clockwise.
Caution:
•
The maximum load must not exceed the nominal capacity.
•
The load must not exceed half the capacity when all pipes are used.
•
The extension of the piston must not exceed the stroke.
Safety precautions
•
Use № 10 working oil.
•
Check the oil level. If there is not enough hydraulic oil, add some.
•
After use, close the valve with the lid so that the oil remains free of dust and dirt.
•
Adjust the jack slowly before lifting to properly distribute the load.
•
The pipe must not be bent or loaded.
Technical specifications
Lifting capacity
(t)
10
Max. lifting height
(
㎜
)
approx. 135 (5.31″)
Min. size
(
㎜
)
approx. 355 (13.98″)
Max. size
(
㎜
)
approx. 490 (19.29″)
Operation pressure
(bar)
620 (62 MPa)
Oil quantity
(g)
500
Weight
(
㎏
)
29
