https://www.XPOtool.com
Item 60312
Page 4
The Tool Experts
04 2022
-1
Operation
1
2
3
1.
Before using the opener for the first time, clamp its base to a table or worktop using the screw
clamp, then place the can that you wish to open onto the base.
With the handle put in vertical position, there is a gap between the cutting knife and body. The
can must be placed so that the body can move downwards, allowing the knife to bore itself into
the top part of the can and to cut an opening.
2.
Now put the handle to horizontal position until the cutting knife is seated in the can, then turn it
to the right. The can will turn as well until its top part is smoothly cut off. Make sure that the lid,
once lifted, does not fall into the can.
3.
Now put the handle to vertical position and remove the open can.
Note:
After use, let the handle in the upright position so that the spring remains untightened and
the device serves longer without problems.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
