Changing Settings
Changing Settings
General Settings
53
Satellites
If you are indoors or do not require the GPS receiver to be active you
can turn it off from the general settings menu. You can also reset the
receiver to drop all active GPS channels and reacquire GPS satellite
signals. If the Xplova G3 is unable to fix your current position, it is
recommended that you reset the GPS receiver.
Note:If the Xplova G3 does not detect a GPS signal after five minutes,
it prompts you to continue searching for GPS signals. Continue
searching in background mode, or turn off the GPS receiver.
Background search mode keeps the receiver actively searching
for GPS signals but does not display the prompt.
Altimeter
Calibration
Calibrate the barometric altimeter sensor. See
“Altimeter Calibration” on page 58.
Compass
Calibration
Calibrate the compass sensor. See “Compass
Calibration” on page 60.
Factory Reset
Allows for restoration of factory defaults. See “Press
the Mode button to back to the General Settings.” on
page 61.
About
Displays hardware and software information. See
“About” on page 63.
Table 2. General settings menu items
Menu Item
Description