Xplore iX104C3 User Handbook Manual Download

Page: 11 / 110

iX104C

User’s Handbook

Welcome

Welcome to the Xplore Technologies

iX104C

™

tablet PC, the rugged

tablet designed, tested, and manufactured to meet the environmental
and physical real-world challenges faced by today’s mobile workers.
The

iX104C

not only works the way you do, but can also take the

abuses of everyday wear and tear. The

iX104C

design is based on

years of experience in rugged mobile applications.

Advanced technology, innovative design, and a rugged case are just a
few highlights of your

iX104C

system. Equally important is Xplore’s

commitment to ensuring that you are treated with the same respect
and honesty you offer to your customers and peers every day.

Who this handbook is for

This handbook provides instructions for using Xplore Technologies

iX104C

tablet computers.

This handbook assumes that
you have basic experience
using computers and
Microsoft

Windows

Summary of Contents for iX104C3















































































































Search results

Summary of Contents for iX104C3

Reviews:

Related manuals for iX104C3

Brands by name

Popular brands

Xplore iX104C3, User Handbook Manual

Search results

Summary of Contents for iX104C3

Reviews:

Related manuals for iX104C3

Brands by name

Popular brands