Xplore iX104C3, User Handbook Manual

Page: 104 / 110

Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Sample implementations
104 iX104C
3
User’s Handbook
Sample 2
To set the tablet to the following configuration:
■
Default digitizer input control is Auto Sense .
■
The user can temporarily change the digitizer input control
settings.
■
The user can change the default digitizer input control settings.
Configure settings as follows:
1.
Do not use the BIOS Setup Utility to set a Supervisor password.
2.
Use the Panel Control Center to set one of the P keys to Digitizer
Selection .
3.
Use the Add new user function to create a user account.
Note: If the user already exists, the setting the administrator has
set replicates to all the users of the computer.