background image

 
 
 
 

This appliance can be used by children aged from 8 years 
and  above  and  persons  with  reduced  physical,  sensory 
capabilities or lack of experience and knowledge if they have 
been given supervision or instruction concerning the use of 
the  appliance  in  a  safe  way  and  understand  the  hazards 
involved. Children shall not play with the appliance. 
Cleaning  and  maintenance  of  the  appliance  shall  not  be 
made by children. 
 
 
 

DX100R/DX100S 

 

      

- Operate the fan using an on/off switch (not supplied). 

DX100TR/DX100TS*

 

      

- Built-in timer operates fan for a pre-set delay from 30 seconds to 30 minutes. 

DX100PR/DX100PS 

      

- Operate the fan using the integral pull-cord. 

DX100HTR/DX100HTS* 

Operates when triggered automatically by the integral humidity sensor, or by using an external 

on/off switch (not supplied). 

In automatic mode:

 the built-in timer automatically operates the fan for a pre-set delay time 

from 30 seconds to 30 minutes once humidity drops below the pre-set Relative Humidity (RH) 
value. 

External operation:

 When switched off using the external on/off switch the fan continues to run 

for the pre-set delay from 30 seconds to 30 minutes. 

DX100HPTR/DX100HPTS

Operates when triggered automatically by the integral humidity sensor, by using an external 

on/off switch (not supplied), or by using the integral pull cord switch. 

 

In automatic mode: 

The built in timer automatically operates the fan for the pre-set delay time 

from 30 seconds to 30 minutes once humidity drops below the pre-set Relative Humidity (RH) 
value. 

 

External operation:

 When switched off using either the external on/off switch or the integral 

pull cord switch the fan continues to run for the pre-set delay from 30 seconds to 30 minutes. 

DX100PIRR/DX100PIRS

-

 An integral body movement sensor operates the fan as long as movement is detected. The built-

in timer automatically operates the fan for a pre-set delay of up to 20 minutes. 

 

* Factory settings:

 Timer 15 minutes, RH 75% 

 
 
 
 
 
 
 
 
 
 

Overall Dimensions (mm)

 

 

 

This appliance is intended for connection to fixed wiring. 
Check that the electrical rating shown on each fan matches the mains supply. 

THE APPLIANCE IS DOUBLE INSULATED AND DOES NOT REQUIRE AN EARTH CONNECTION. 

All installations must be supervised by a qualified electrician. Installations and wiring must conform 
to current IEE Regulations (UK), local or appropriate regulations (other countries). 

 

 

All Xpelair Simply Silent

TM

 DX100 AC fans have the following features: 

 

Two speed extraction (Selectable at installation) 

 

 

 

Summary of Contents for DX100R













Reviews: