XPEECH 2S Page 82 Operation Manual Download

Page: 82 / 103

SIP Operation Manual

NTP

This section works with Time server to provide NTP time synchronization. The gateway will get its
local time from specific time servers after it connects to Internet.

Time Zone: Set the Time Zone where the gateway resides.

Time Server #1~#3: Set the Time Server where the gateway should sync up during start

up. (via NTP protocol)

Backup/Restore

You can backup settings to a file on a PC and restore it back.

NOTE: You have to save settings and restart, and all settings will be restored.

Configuration File: Click

Backup

to backup all settings.

Configuration Template File: Click

Backup

the settings as a template file for editing.

(not for end user).

Restore Default Configurations: Restore the device back to the factory default settings.

Summary of Contents for 2S








































































































Search results

Summary of Contents for 2S

Reviews:

Related manuals for 2S

Brands by name

Popular brands

XPEECH 2S, Operation Manual

Search results

Summary of Contents for 2S

Reviews:

Related manuals for 2S

Brands by name

Popular brands