43
SIP Operation Manual
Trunk Hunting Order: To set FXO dial-out mode when there is an incoming call dialed
FXO representative or unassigned call.
First Idle:
The gateway will assign each unassigned call from first FXO port.
Sequential:
The gateway will automatically assign the first unassigned call to the first
FXO port. The second FXO port will dial the second unassigned call out. Each line be
used.
Enable FXO/Trunk Extension Number: Selects this function only when FXO is connected
to different PBX or PSTN, or under special circumstances. Users are free to call out from
a desired channel, if assigned. If you register to a Proxy it MUST be checked.
Description:
Assume a user at Port 1 of the gateway would like to assign Port 4 (FXO) to make a call and
Enable FXO/Trunk Extension Number
is checked. The user can dial 704 22520199 to assign
Port 4 to dial out.
If
Enable FXO/Trunk Extension Number
is unchecked, the gateway will select a FXO line
automatically to call out. The user can dial 22520199 without adding FXO extension number
703 or 704.
