18
HTL 2335HD
Engl
ish
Connection
Power connection
Connect the cable mounted female connector (IEC C13) of the power cable to the
male connector (IEC C14) of the power adapter. Connect the female coaxial power
connector to the power plug of the TV set. Connect the CEE 7/7 plug with the wall
mounted power outlet.
On the front side you can see a red LED light. The TV set is now in Stand-By
mode. By pressing the
POWER
button on the remote control or on the top side of
the device the red LED changes to a green light.
Antenna
The TV set has an analogue and a digital TV Tuner inside. For receiving analogue
TV signals please connect the antenna cable with the RF connector on the TV set
and with the VHF/UHF roof antenna or with a CATV antenna plug.
For receiving digital terrestrial TV signals please connect the TV set with the RF
plug and also with the roof antenna. If no roof antenna is available, please use
indoor aerial.
For activating the analogue TV Tuner, please switch with the
INPUT
button and
choose in the popup window „A
TV
“ or “
DTV
“ for digital terrestrial TV.
Note:
For getting the best DVB-T reception please uses the roof antenna. If not possible, than you can
connect the TV set with an active indoor aerial.
SCART Input
Audio– and Video signals from a VCR or a setop box can be
transmitted by SCART. Please connect a SCART cable with the
SCART input on the TV set and with the SCART output on the
VCR or setop box.
Press the
INPUT
button and choose „
SCART
“ in the popup
window and the SCART interface is activated.
HDMI
If you want connect a multimedia device with HDMI like a
game console „PS3“ or a setop box with the TV set, you can
establish a HDMI connection. Please connect the HDMI
cable on the
HDMI
interface on the TV set and the HDMI
output of the multimedia device.
Please press the
INPUT
button and choose „
HDMI
“ in the
popup window and the HDMI input is active.
