30
HTL 2335HD
Engl
ish
Recording program
After you setup the settings on the DVR File System menu, you can record a DTV program on the
external USB device. Select the desired program then press the
RECORD
button on the remote
control to start recording and the progress bar will be displayed.
During recording, the progress bar will fade out in 10 seconds.
Press the
RECORD
button again, an icon will blink on the bottom right corner of the screen and it will
fade out in 10 seconds. Recording stops when you press the
STOP
button and the recorded file is
stored n the external USB device automatically.
Schedule Recording by EPG
Schedule record is a function which allows you to record
future program. You can first set up a schedule record, then
unit will record the program when the program is broadcast.
It will stop recording when the program finish.
1. Press
the
EPG
button to display Electronic Program
Guide menu.
2.
Select your desired TV program and press the
REC
button to enter the Recorder menu, as shown:
3.
From here you can modify the start and end date
time of your record schedule by using the
◄►
direction button once.
4. Use
the
▲▼
direction button to select date/time to
change.
5. Use
the
▲▼
button to select desired item and press
the
OK
button to enter.
Recorder
Program
Select a program.
Start Date
Set a date to start recording in the future.
The start date should be later than the current date.
Start Time
Set a time to start recording in the future.
The start time should be later than the current time.
End Date
Set a time to end recording in the future.
The end date should be later than the start date.
End Time
Set a time to end recording in the future.
The end time should be later than the start time.
Only one program can be recorded in the same period of time.
Mode
Choose either Once, Daily, Weekly.
