ENG
16
Engl
ish
Initial Installation
Initial Installation
The XORO installation menu will be displayed by initial
operation of the DVB Receiver. This menu contains
four options:
1. OSD
Language
2. Country
3. Channel
search
4.
Load the pre-inst.
Navigate with the arrow keys
CH+
and
CH–
to high
light the option and make the selection with the
VOL–
and
VOL+
buttons.
OSD Language
Choose the menu language.
Country
Select the country where you use the DVB Receiver.
Channel Search
Please select “Channel Search/Satellite Setting” to define further parameters for a scanning, if your
satellite receiving system fulfill following criteria:
System with rotatable antenna
System with more than one antenna or LNB (DiSEqC)
System with nonstandard components
Most of the customers could complete the installation by selecting “load the pre-inst.”.
Load the Pre-inst.
A program list of the satellite ASTRA 19.2° is saved in the factory firmware. German TV programs
top this list.
In most cases, the installation is completed with loading the program list.
Select the OSD language and country and decide whether to load the pre installed program list.
Press
OK
to confirm.
The first TV program will be shown on the screen
after loading the pre programmed list. If there is
no TV program to be seen, please check the
cable connection, Antenna Set up and carry out
the channel scanning.
If you have chosen not to take the pre installed
list, there appears a “Dish Setup” menu on the
screen.
For the case there appears no “Installation Guide”
menu after connection and power on, please read the
page 35 to reset the device.
