Xoro HRS 8525, User Manual

Page: 54 / 78

ENG 16
HRS 8525
Engl
ish
Initial Installation
Initial Installation
The XORO installation menu will be displayed by
initial operation of the HRS8525. This menu contains
four options:
1.
OSD Language
2. Country
3.
Channel search
4. Load the pre pre-inst. list
Navigate with the arrow keys
CH+ and CH– to high
light the option and make the selection with the VOL–
and VOL+ buttons.
OSD Language
Choose the menu language.
Country
Select the country where you use the HRS8525
Channel Search
Please select “ Channel Search /Satellite Setting” to define further parameters for a scanning, if your
satellite receiving system fulfill following criteria:
•
System with rotatable antenna
•
System with more than one antenna or LNB (DiSEqC)
•
System with nonstandard components
Most of the customers could complete the installation by selecting “load the pre –inst. list”.
Load the pre –inst. list
A program list of the satellite ASTRA 19.2° is saved in the factory firmware. German TV programs top
this list.
In most cases, the installation is completed with loading the program list.
Select the OSD language and country and decide whether to load the pre installed program list.
Press
OK to confirm.
•
The first TV program will be shown on the screen after loading the pre programmed list. If
there is no TV program to be seen, please check the cable connection, Antenna Set up and
carry out the channel scanning.
•
If you have chosen not to take the pre programmed list, there appears an “Dish Setup” menu
on the screen,
For the case there appears no “Installation Guide” menu after connection and power on, please read
the page 35 to reset the device.