of
20
Initial
•
With the Taste
GOTO
you display the transponders stored for the selected satellite. The
RED
button allows you to add new transponders. The
OK
button is used to select
transponders for a search.
Antenna and
search
-
explanation
of the
parameters
LNB Type
Select which oscillator frequency your LNB
uses. The correct value can be found in the
manual of your LNB.
(Default: 09750/10750)
If
you
have
a
Unicable/SCR
EN50494
receiver, please choose the LNB type
Unicable
(A
or B, for a Unicable system for receiving a
satellite A is usually the right choice). Now select
a free
user band
and its
band frequency.
Please refer to the instructions for your Unicable recommendation system for details. Ask your
landlord about the free user tape when the connection is provided in a rental apartment. The
settings "LOF Lowband"and "LOW Highband" need to be changed very rarely and should always
be left at 09750 und10600 .
LNB Supply
The setting determines with which voltage the antenna system is supplied. The level of voltage
also determines whether horizontally or vertically polarized transponders are received. This
setting must only be changed in very rare cases. An incorrect setting causes senders to be
missing or no reception possible.
(Standard: 13/18V)
22KHz
By switching on a 22KHz signal, the receiver can switch the LNB for receiving another frequency
band. This setting only needs to be changed in very rare cases. An incorrect setting causes
senders to be missing or no reception possible.
(Standard: Auto)
Toneburst
Toneburst switches have two inputs, allowing you to connect two antennas or LNB to the
receiver. If you have such a switch, you must choose to which of the connections (A or
B)
the satellite selected on the left is connected.
