18
13. CAM Module
If you want to watch Pay-TV, then
you need a CAM module with the
appropriate subscription card. All
the CAM modules which correspond
with CI and CI+ standard are
supported.
¾
CI+ module authenticate
If you insert the CI+ module, it will
appear the prompt box such as the right picture. Waiting few minutes, it will appear
the other prompt box. The information is “Your Module is operational”. Then the
prompt box will disappear automatically.
Note: If you inset the module first time or switch to another module, the module will
authenticate for a long time. Please wait patiently.
14. Additional Information
14.1 Trouble Shooting
Before contacting your local service centre, please read the tips below carefully. If
the problem persists after completing the following procedure, please contact your
local product distributor or service centre for further instructions.
1. No message displayed on the front display. (The product will not switch on.)
• Check the main power cable and make sure it is plugged into a suitable power
outlet.
• Check that the mains supply is switched on.
• Connect the power cable to a different power outlet.
• Check that the power switch is on at the rear of the product.
2. No picture
• Make sure that the product is powered on and in operation mode. (Press the
STANDBY button)
• Make sure that the AV/HDMI cable is firmly connected to the TV.
• Make sure that the antenna cable is properly connected to the product.
• Be sure to activate channel search.
• Check the brightness level of the TV.
• Check if the channel is currently on air. Contact the broadcaster to ensure that the
channel is running.
Summary of Contents for HRK 9200 CI+
Page 1: ...Bedienungsanleitung DE User s Manual ENG HRK 9200 CI...
Page 2: ......
Page 44: ...User s Manual ENG HRK 9200 CI...
