19
Symptom(s)
1 or more LED's are
not illuminating
Possible Solution(s)
Clean the fixture regularly to avoid any such failure. This fixture is
convection cooled, which means that if the surface is kept clean
and free of debris, then proper cooling will be allowed to occur
An LED may have failed, resulting in an open circuit. In this
event, all of the red, green, or blue in a single module will no
longer illuminate. This does not mean that all of the LEDs have
failed, but the circuit is wired in series.
An LED may have failed, resulting in a short circuit. In this event, only
the single LED which has failed will no longer function. This does not
mean that all of the LEDs have failed, but the circuit is wired in series.
-Note: In the event of LED failure, a replacement LED PCB
assembly may be purchased directly from Our company
AUTO PROGRAMS
Chanel 5 selects the preset combine auto program (AP 1~50)
Chanel 6 selects the preset combine cartoon effects(CP 1~25)
Chanel 9 selects the preset Auto program (AT 1~50)
When activating the Auto programs, then it is possible to control the auto speed
by using Channels 10
Channel 9 has priority over channels 2-8.
Channel 5 has priority over channels 2-6.
Channel 6 has priority over channels 2-4.
5. APPENDIX
Service Maintenance Guide
