XONTEL XT-23G User Manual Download

Page: 43 / 166

3. Click

to save the configuration.

Time and Date

Time and date is displayed on the idle page, and it can be set automatically by SNTP

server or manually by manual setting.

To configure the time and Date by SNTP setting via Phone interface

1. To press M

enu → Settings → Basic Setting → Time & Date → SNTP Settings

2. Press

to change the Time zone.

3. Fill the NTP Server1, NTP Server2, and select the mode of Daylight Saving.

4. Press

or Save soft key to save the configuration.

To configure time and date manually via Phone interface

1. To

press Menu → Settings → Basic Setting → Time & Date → Manual

2. Press

and

or change the right time, or you can input the right time.

3. Press

or Save soft key to save the configuration.

Note:

Backlight Time refers to the time into the backlight

Summary of Contents for XT-23G







































































































































































Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands

XONTEL XT-23G, User Manual

Search results

Summary of Contents for XT-23G

Reviews:

Related manuals for XT-23G

Brands by name

Popular brands