4.6
Maintenance
The software can be upgraded by the following steps:
Step1: Browse and select the upgrading file;
Step2: Click the “upgrade” button after it prompts upload file successfully. After the system
reboots successfully, the update is done.
Note:
1) Do not disconnect the power of the device during the update. The device will be restarted to
complete the upgrading.
Figure 4-6-1 Maintenance
Table 4-6-1 Description of the buttons
Parameters
Function Introduction
System Upgrade
Hardware Version:
The hardware version of the camera
Software
Version:
The software version of the camera
Kernel Version:
The
kernel version
Firmware File:
Select the firmware used to upgrade
Maintenance
Reboot the device:
Click “
Reboot
” button to restart the device immediately
Reset settings:
Click “
Restore
” button to reset the camera to factory default settings
Export Configuration File:
Click this button to export the configuration file
Configuration File:
Click this button to import the old configuration file then click “
Upload
”
