XONTEL S20P, User Manual

Page: 11 / 48

3.1.1 Assign an IP Address via Browser
If the network segment of the computer and that of the camera are different, please follow the
steps to change the IP address:
Step1: Change the IP address of computer to 192.168.5.0 segment, here are two ways as below:
a. Start

Control Panel

Network and Internet Connection

Network Connection

Local Area Connection, and double click it. (Refer to Figure 3-1-8);
Figure 3-1-1 Setting Network Segment IP Address of Computer
b. Click “Advanced”, and then click “IP settings”

“IP address”

“Add” (See Figure
3-1-9). In the pop-up window, enter an IP address that in the same segment with
XonTel network camera ( e.g. 192.168.5.61, but please note that this IP address
shall not conflict with the IP address on the existing network);