Step 2: push the buckle down from the front of the seat,
and lift the cushion cloth cover,
Take out the buckle from the cloth cover, and store the
buckle according to the picture below (Picture D).
17
18
INSTRUCTION
EN
Never use the child seat without it
correctly installed.
Check that the harness straps are not
twisted and that they have been correctly
inserted in the belt slots of the cover.
5.9 Removing the Fabric Cover
CAUTION!
CAUTION!
1. Remove the 5-point harness.
2. Take off the cover from the backrest and base.
3. Move the headrest of the child seat up to the
highest position.
4. First take the cover off the base of the
headrest, then remove the cover of the
headrest.
To re-fit the cover, simply follow the above steps
in reverse.
6. INSTALLED IN CAR
6.1 Installed in Rearward facing position
6.1.1 Installed in Rearward facing position with Belt
Group 0+(0-13kg)
D
5.8 Removing Triangle Pad and
Sleeping Pad
When your child's weight exceed 8kg, remove
the triangle pad.
When your child's weight exceed 12kg, remove
the sleeping pad.
Pull the vehicle seat belt , the diagonal seat belt
Rotate the seat to 90 degree first, then use the
recline handle to adjust the seat to the maximum
angle.
Later fix the seat in the rearward facing position.
section is bypassed from the back of the seat and
passes through from the between of the headrest
and backrest, the lap belt section through the belt
guidance and under the sleeping cushion. Ensure
that the buckle tongues are properly locked into the
vehicle seat buckle - you will hear an audible
CLICK!
Then adjust diagonal belt and lap belt as follows:
The side which can pull out belt:
Adjust the diagonal seat belt section is through
from the between the headrest and the backrest.
The side which can insert buckle:
Fasten the seat belt and pull it tight, ensuring that
the seat belt is not twisted.
