Xo BAR PRO, Care & Use/Installation Manual

Page: 3 / 12

INSTALLING THE DRAIN ASSEMBLY
For ease of installation we recommend that the drain assembly be installed before installing the sink into the counter
top.
1. Remove the drain assembly from the box and identify the following parts:
INSTALLING THE DRAIN ASSEMBLY
a. Drain Plug/Strainer Basket
b. Upper Drain Fitting
c. Rubber Gasket
d. Paper Gasket
e. Locknut
f. Tailpiece
g. Threaded Coupling
Sink Bottom
2. Remove the drain plug strainer basket (a) and separate the upper drain fitting (b) from the remainder of the
drain assembly.
3. Place a bead of Plumbers Putty* around the underside lip of the upper drain fitting. Drop the upper drain fitting
(b) into the sink bottom opening and press it firmly into place. From the bottom of the sink position the rubber
gasket (c) and then the paper gasket (d) on the upper drain fitting (b). The paper gasket (d) is used to prevent
kinking of the rubber gasket (c) while tightening the locknut (e).
4. Align the drain assembly so that it sits centered in the sink drain cut-out. Screw the locknut (e) on to the upper
drain fitting (b) threaded connection until it is hand tight. Now use a tool to tighten the locknut (e) another
quarter turn.
5. Remove any excess Plumber Putty with a damp cloth.
* Plumbers Putty is available at most home improvement centers. Plumbers putty is an
easy-to-mold setting compound for use with stainless steel sealing applications. Do Not Omit This Step.
Sink Opening
1/2” NPSM
Waste Outlelet