XO Appliance XOA30, Instructions Manual

Page: 7 / 8

2.Reinstall the wiring box cover
.
3.Plug back the small connector inside the hood
.
4.Reinstall the bottom plate
,
make sure both grease guides are aligned with the
holes
,
install the grease pan
.
5.Using long nose pliers
.
Pull out each of grease guides
(
A
),
then set them in
such a way their flange slightly protrudes above the bottom of surface
(
B
).
LIGHT BULB
This range hood may require two halogen bulbs (Type JCD, 12V, 20W Max, G-4 Base)
WARNING: Always switch off the electrical supply before carr ying out any operation on
the appliance.
To change bulbs
:
1.Kick off the halogen bulb cover by using the flat screw driver
.
2.Remove the bulb by pulling sideward
(
DO NOT ROTATE
).
3.Replace with Type JCD
,
12V
,
20W Max
,
G
-
4 Base halogen bulb
.
Do not touch
replacement bulb with bare hands
!
CAUTION
:
1.THE SURFACE
,
THE COVER OF THE HALOGEN BULBS MAY BE HOT
.
TAKE CARE WHEN
TAKING THE REPLACEMENT
.
2.BULBS MAY BE HOT
.
TAKE CARE WHEN TAKING THE REPLACEMENT
.
OPERATION
The hood is operated using electronic switch on the front panel
.
ELECTRONIC SWITCH
1
–
TIMER DELAY OFF SWITCH
2
–
LAMP SWITCH
3
-
DISPLAY
4
–
FAN SPEED SWITCH
5
-
ON
/
OFF SWITCH
LOCK ADJUSTMENT
When using this hood for the first time, or after a power failure, the display flashes regularly. To
stop flashing, press on
/
off key for more than 5 seconds
,
the hood will be set to time
setting mode
.
By pressing lamp key or fan speed key to change time setting
,
each single
press or keep keys pressing can changes the time by 1 or 3 either up or down. Press the
on
/
off key for confirmation when the right time appears
.
1.The timer delay off switch
,
user can adjust the time 3
-
6
-
9
-
12
-
15
-
0 minutes by
pressing this button in turn
,
if no action occurs within 3 seconds
,
the countdown will
start automatically
.
The hood will be off when the countdown ends
.
2.The lamp switch button
,
Controls the lamp on and off;
Change the time down in time setting mode
.
3.Display
,
shows the hood operation status and setting
.
4.Fan speed button
(
six speeds
)
Controls the fan speed;
Change the time up in time setting mode
.
5.On
/
off switch button
Controls the hood on and off if pressing less than 5 seconds
.
Entry to time setting mode if pressing more than 5 seconds
.
11 12