Notice NOT 083
NXS 150
Rev : 00
Date : 13/10/05
DESCRIPTION
5.
GENERAL CHARACTERISTICS
NXS 150 welding machines have been designed as integrated and portable units using the latest techniques in
power electronics, based on an
inverter process with IGBT
, which enables the following:
-
a considerable reduction of weight and volume,
-
the dynamic control of the welding current,
-
the specific protection of power components,
-
a high power in a small space at a very low power consumption.
NXS 150 unit allows two possibilities of mains power supply : 110V or 230 V. It automatically senses the
input voltage value (smart link TM) without needing any switching by the operator.
This machine has built-in
over voltage protection
, only
when its power supply connection is 110 Volts
, which
allows
engine driven generator supply.
It allows stick welding with coated electrodes and TIG process with a valve torch.
6.
TECHNICAL CHARACTERISTICS
DIMENSIONS ( in mm )
USER’S MANUAL
Page
13/20
Summary of Contents for NXS 150
Page 1: ...NXS 150 Dual Voltage OPERATING MANUAL ...
Page 19: ...17 WIRING DIAGRAM ...
