NETWORK : This Ethernet terminal connects to 10Mbps or 100Mbps LAN through an RJ-45 connector.
When optional PoE is used, the power will be supplied from the Network Cable.
LINK : Yellow light indicates that the network is properly connected.
ACT : Green light indicates that the XNET system connected to 100Mbps LAN.
This green lamp will blink if the system receives data.
STATUS LED : Indicates the operation status
EVENT LED : Green light indicates that Alarm Out signal is turned on.
POWER LED : Red light indicates that 12V DC power is connected.
y
SD CARD SLOT : Enables recording of video data to an external memory device upon occurrence of
an event. Please use less than 4 GB SD Memory.
Figure 2-4. SD CARD
Power Terminal: Connect 12V DC Power Adapter to this terminal.
Do not use this connector when powering up the product through LAN
cable. (PoE) The product is not covered under warranty when it is
damaged by connecting both Ethernet power and 12V DC power to this
terminal.
8 / 17
Summary of Contents for INS2000
Page 17: ...17 17 ...
