xMount@Wall
•
Remove xMount from the packaging.
•
Fasten xMount at the fastening system selected by
you with the catch mechanism clicking into place.
•
Before using xMount, please check whether the
fastening system has clicked into place correctly.
•
You must notice a hearable click.
•
Fasten xMount Wall using the enclosed fastening
material.
•
Mark the drilling locations using a pencil. Use
xMount Wall as a template here.
•
In the event of a stone wall drill two holes at the
position intended by you using a 6 mm masonry
drill.
•
Fasten xMount using the two enclosed wall plugs
and screws.
•
Using the interior adjusting screw you can adjust
the inclination angle as well the tower base which
is turnable by 360 degrees.
