xMount@Car&Home
•
Remove xMount from the packaging.
•
Fasten xMount at the fastening system selected by
you with the catch mechanism clicking into place.
•
Before using xMount, please check whether the
fastening system has clicked into place correctly.
•
You must notice a hearable click.
•
For fastening your xMount Car & Home at the
intended surface please use the enclosed suction
connector.
•
Moreover, please absolutely ensure the fastening
surface is clean and free from grease, this surface
is required to be cleaned every 24 hours.
•
Using the posterior adjusting screw you can indivi-
dually adjust the inclination angle of your xMount.
•
Using the anterior adjusting screw you can turn the
tower base by 360 degrees.
•
Before usage, these adjusting screws are required
to be tightened.