Xmotos XB21A 2018 Operating Instructions Manual Download

Page: 7 / 60

Your personal safety, and the safety of those around you, is extremely important. Operating this motorcycle

safely is an important responsibility. Koolcnchet has provided operating procedures and other information

on labels and in this manual to help you make informed decisions about safety. This information will alert

you to potential hazards that could harm you or others.

It is understood that it is not practical or possible to warn you about all possible hazards associated with

operating and maintaining a motorcycle. You must use your own good judgment.

Safety information will come in a variety of different forms, including:



Safety Labels on the Motorcycle.



Safety Messages preceded by a safety symbol

and one of these signal words:

Below are the definitions of these three words:

You WILL be KILLED or SERIOUSLY INJURED if you do not follow instructions.

You CAN be KILLED or SERIOUSLY INJURED if you do not follow instructions.

You CAN be INJURED if you do not follow instructions.



Safety Headings such as important safety reminders and/or precautions.



Safety Section such as motorcycle safety.



Instructions how to use the motorcycle safely and correctly.

This entire manual is filled with important safety information - please read it carefully.

Summary of Contents for XB21A 2018





























































Search results

Summary of Contents for XB21A 2018

Reviews:

Related manuals for XB21A 2018

Brands by name

Popular brands

Xmotos XB21A 2018, Operating Instructions Manual

Search results

Summary of Contents for XB21A 2018

Reviews:

Related manuals for XB21A 2018

Brands by name

Popular brands