XMOS xCORE-200 Multi-channel Audio board Design Manual Download Page 12

Page: 12 / 112

USB Audio Design Guide

12/110

2.2.3

Audio Clocking

The board provides a low-jitter clock-source, an 24.576MHz oscillator, to serve as

reference clock to the CS2100-CP (Cirrus Logic) Fractional-N PLL (U22).

The CS2100 generates a low-jitter output signal that is distributed to the xCORE-

200 device and DAC. The CS2100 device is configured using the I2C interface.

2.2.4

Buttons, LEDs and Other IO

The board has 13 LEDs that are controlled by the xCORE-200 GPIO. The layout of

the LEDs is shown in Figure

MIC6

MIC1

MIC2

MIC5

D14

D10

D11

D12

D13

xCORE-200

XUF216

MIC4

MIC3

Figure 3:

xCORE-200

Microphone

Array Board

LED

Arrangement

LED 0 to LED 11 (D2-D13) are positioned around the edge of the board, one
each side of every microphone. LED 12 (D14) is positioned next to the middle
microphone.

XM0088546.1

Summary of Contents for xCORE-200 Multi-channel Audio board
















































































































Search results

Summary of Contents for xCORE-200 Multi-channel Audio board

Reviews:

Brands by name

Popular brands

XMOS xCORE-200 Multi-channel Audio board, Design Manual

Search results

Summary of Contents for xCORE-200 Multi-channel Audio board

Reviews:

Brands by name

Popular brands