2019-06-19
Copyright © 2019 XMOS Ltd, All rights reserved XM-013899-PC
VOCALFUSION DEV KIT - USER GUIDE
11
6. FURTHER INFORMATION
6.1. DOCUMENTATION
Title
Download
XVF3510-QF60 Datasheet
http://www.xmos.com/file/xvf3510-qf60-datasheet
XVF3510-QF60 Control Guide
http://www.xmos.com/file/xvf3510-qf60-control-guide
XMOS Tools User Guide
http://www.xmos.com/file/xmos-tools-user-guide
VocalFusion Dev Kit for Amazon AVS User Guide
http://www.xmos.com/file/vocalfusion-dev-kit-for-amazon-
avs-user-guide
6.2. UPDATING THE XVF3510 FIRMWARE
The VocalFusion Dev Kit is shipped with firmware for each configuration, allowing you to start evaluating the
XVF3510 device without installing additional software. If you need to reinstall or upgrade, you will need to download
the XMOS software tools, which are available free of charge for registered XMOS users:
Download
Description
URL
XVF3510 firmware
XE binaries for all configurations
xk_vf3510_l71_usb
xk_vf3510_l71_i2s_slave
xk_vf3510_l71_hybrid_usb_i2s
https://www.xmos.com/xvf3510
Adestro AT25SF161 configuration file
ADESTO_AT25SF161.spispec
The VocalFusion Dev Kit includes an XTAG debug adapter. Plug the adapter into the XSYS DEBUG connector on
the XVF3510 base board, and then use a USB cable to connect the XTAG to your development system.
Extract the XE files from the firmware download
Open the xTIMEcomposer command prompt:
•
Windows: Start > XMOS > xCommand Prompt
•
Mac OSX: Finder > Applications > XMOS_xTIMEcomposer > SetEnv.command
Go to the folder that contains the binary and enter:
xflash --no-compression <filename>.xe --spi-spec <filename>.spispec
Wait for the flashing program to complete. When finished the following message will be displayed:
Site 0 has finished successfully
All done!. Close the tools command prompt and unplug the XTAG adapter from the kit and PC.
Further information on using xflash and the XMOS tools is available in the xTIMEcomposer User Guide.
