4/23
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
2.2.1 Line Termination
In DMX Mode, at the last fixture in the chain, the DMX output has to be
connected with a DMX terminator. This prevents electrical noise from
disturbing and corrupting the DMX control signals. The DMX terminator is
simply an XLR connector with a 120
(ohm) resistor connected across pins 2
and 3, which is then plugged into the output socket on the last projector in
the chain. The connections are illustrated below.
2.3 AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Warning!!! All fixtures must be connected to circuits with a
suitable Earth Ground.
