10
9. Operate your XMG OASIS
1.
Make sure that laptop and XMG OASIS are connected to external
power and that the water tubes are firmly attached.
2.
Power on your laptop and make sure that Bluetooth is turned on as
well.
3.
Press the power button on the XMG OASIS main unit. The LED
indicator of the power button will start pulsating in blue color.
4.
Open the Control Center on your laptop and find the XMG OASIS
control module. At first run, the application will pop up with a short
tutorial. The exit button is on the last page of the tutorial.
5.
Click the “Connect” button. XMG OASIS will now pair with your laptop
via Bluetooth. At this moment, the fan and pump will start operating.
6.
Check all ports for leakage after five minutes. If you find any drops of
fluids on the chassis or on the surface below, turn everything off,
disconnect power and check the connections.
7.
During longer use, the water level may slowly drop due to evapo-
ration. Small drops of liquid are also lost when disconnecting the
quick release connector from the laptop. Please check the water
level behind the front lens of the main unit on a regular basis.
Optimal water level is about 1
cm below the “Maximum” line.
⚠
Water expands as it gets hotter. If you fill over the Optimum line, increased
water pressure during prolonged operation may cause liquid to push against
the refill port cover, causing small leaks through the top of the main unit.
ℹ
XMG OASIS will automatically go to standby and the pump and fan will stop
if host laptop enters standby, hibernate or shutdown.
ℹ
XMG OASIS will automatically reconnect to host laptop if the Control Center
is installed on the laptop and the devices are within Bluetooth range.
10. Stop operation of XMG OASIS
1.
In the XMG OASIS module of the Control Center, click on the “Discon-
nect” button. Wait a few seconds until the fan and pump inside the
main unit have come to a full stop.
2.
Power down XMG OASIS by pressing the power button on the top of
the main unit. When the device is powered down, all LEDs will be off.