Wireless NVR System User Manual
38
Camera Title
Modify the Camera Title
Color adjust
Set the color tone, brightness, saturation, and contrast
OSD Alpha
Modify the OSD Alpha
VGA resolution
Select the correct screen resolution
Auto Switch
Whether to enable auto switch and set the switch time
Tips:
Skip video loss means if the screen does not show image of any channel, this channel will not be
displayed at auto switch
Choose 1 or 4 to set how many channels be displayed at a time at auto switch, 1 means display
only one channel at a time, while 4 means display 4 channels at a time
VGA resolution should match your screen resolution. If your NVR outputs different resolution
that your screen takes, you may not get display on the screen. Please connect the NVR to a high
resolution screen and set it to correct resolution and then connect back to your primary screen.
4.10.4 Hard drive Settings
Function Description:
Allows you to format your hard drive.
Operation Steps:
1. Right click mouse in your system, choose “System setup” to enter system setup interface.
2. Choose “General setup” – “HDD Setup”, you’ll see below interface, as shown in Image 45.
Image 45
3.
Check installed hard drive information here, including Model, Capacity, Used, Status, and Format.
4.
Check “Overwrite” to enable auto overwrite.
