10
Assembly
Step 8
Attach the tether on the seat adjustment pin (40) to the seat frame (10) using an M4X16mm
screw (57).
Attach the seat pad (21) to the seat frame (10) with four M6X20mm screws (41).
Step 9
Attach the Upper Back Pad (22) and
to the two backrest frames (17)
with eight M6X40mm screws (48) and eight M6 washers (54).
17
48
48
48
54
54
54
54
22
54
54
48
57
1 0
40
41
21
41
Figure 8
NOTE
:
Hand tighten bolts and lock
nuts until machine is fully assembled.
Note:
Do not fully tighten the screws yet.
25
Lower Back Pad
(25)
