XM Satellite Radio onyX XDNX1, User Manual

Page: 67 / 114

67
Special Features
tool counter-clockwise until it will not rotate any further .
3 The Trim Ring is now loose . Turn the onyX over and the Trim Ring
should fall out . If it does not, gently tap the back of the radio until
it does .
4 Turn the radio face up again and insert the new Trim Ring into the
radio .
5
Align the Trim Ring Removal Tool on the Trim Ring on the radio .
Use care to align the tool so it’s centered on the Trim Ring .
6
2 3 4 5 6 7 8 9 0
direct
jump
FM
menu
1
Using mild pressure to keep the tool against the Trim Ring, rotate
the tool clockwise until it will not rotate any further . The new Trim
Ring is now installed .