12
10.1. Setting for Lower Position (Service Level)
a)
Power up the lift after installation, press DOWN button, the lift will
travel and stop at the position preset by the factory.
b)
To delete the limit setting of this position, press the UP and DOWN
button simultaneously until the lift begins to move briefly (up and
down).
2 to 3 seconds
c)
Adjust the lift to the require position while the UP or DOWN key are
pressed (holding period).
OR
d)
Press and hold the STOP button until the lift begin to move briefly (up and
down), the new position is recorded.
2 to 3 seconds