11
8.
Re-adjusting the limit settings
NOTE:
The UP and DOWN adjustment shall be done within 4 minutes. The
motor is equipped with a built-in thermal overload protector which limits
their operations to intermittent use only, the power supply will be cut off
temporarily if continuous operated for more than 4 minutes. If such
things happen, please wait for the motor to cool down and restart it
again.
The hand held transmitter (remote control) is paired with the lift in factory; the
transmitter will not communicate with other lift by default.
The lift is preset with Upper (Stored Position) and Lower (Service Position) limits.
UP button
DOWN button
MY button
(SHOW button)
Programming
button
Hand Held transmitter
Back of Hand Held transmitter
