Xlink ITC-BTTN, Owner'S Manual

Page: 12 / 24

12
sometimes dial tone will be heard when an extension telephone is picked up to
continue an active call that was transferred from your cell phone to the XLink.
When this happens dialing
*
# can be used to connect the call.
ForCe Call CoNNeCTIoN
SPeed dIalING
When a cell phone that has been paired and is currently connected with the
XLink rings, all telephones plugged into the XLink will also ring.
Each line has its own distinctive ring pattern, allowing you to immediately know
which cell phone the current call is coming in on.
You can also tell which line is ringing by looking at the line buttons on top of the
XLink. The blue light for a ringing line will flash with a unique cadence.
some cell phones support speed dialing. The XLink allows you to access speed
dials 2 through 9 from extension telephones. Use the following steps:
1. Pick up an extension telephone. Listen for dial tone.
2. OPTIONAL: select Line: 1 fLAsh or 2 fLAsh or 3 fLAsh
3. Dial speed dial digit, 2 to 9
4. Dial #
Example: To activate speed dial 3 on a the cell phone paired to line one, press
1 fLAsh followed by 3 #
reCeIvING a Call