2. Display
XiteSolutions North America Inc.
8
2.1 Monitor Display
Functions:
Bluetooth Microphone.
LDR (light dependent resistor) and IR (infra-red) receiver
1.
LDR is used for the dimming of the display and is active when Auto dim in
System Settings is set to Sensor
2.
IR receiver is used with remote control operations
MENU
1.
Tap MENU button once to go to the Main Menu (or Home Page)
2.
When in the Main Menu, you can either use the touch screen to select the
desired icon (source) or you can keep tapping the Menu button to select
different icons on the screen. When icon is highlighted for more than 1
second, the system will automatically open that icon
3.
You can also access the Main Menu from any screen by tapping the
function icon in the top left corner of the current screen
Note: When viewing video in full screen, touch the screen once to bring up the icon
header which will display the function icon. Tap the icon to return to the Main Menu
NAVI
1.
Press the NAVI button once to go to the navigation system
2.
While viewing your navigation press the NAVI button to return to the
active source (Radio, or SXM, or DVD, etc.). If the navigation route is
running, navigation audio voice prompts will continue to be heard over the
speakers according to the Navigation audio settings you have selected in
the Settings menu (See section 3.3 of this manual for more information).
3.
To hear only the navigation audio voice prompts, press and hold NAVI
button for 2 (two) seconds. This will mute the active source until you
leave the navigation screen.
DIM
1.
Press DIM button to select the desired brightness of the screen. There are
5 different levels, and level 5 is the brightest.
Note: DIM will not work if Auto dim option is set to Sensor
.
5
6
7
4
3
2
1
1
2
3
4
5
