Wireless Array
Viewing Status on the Wireless Array
95
Figure 44. Disabled IAP (Partial View)
•
Channel
: Shows which channel each IAP is using, and the channel
setting. To avoid co-channel interference, adjacent radios should not
be using adjacent channels. To make channel selections for a specific
IAP, go to
“IAP Settings” on page 290
.
•
Wi-Fi Mode
: Shows the 802.11 client types that the IAP has been
configured to support.
•
Antenna
: Shows which antenna is being used by each IAP.
•
Cell Size
: Indicates which cell size setting is currently active for each
IAP — small, medium, large, max, automatic, or manually defined by
you.
Figure 45. IAP Cells
The cell size of an IAP is a function of its transmit power and
determines the IAP’s overall coverage. To define cell sizes, go to
“IAP
Settings” on page 290
. For additional information about cell sizes and
the importance of planning for and defining the optimum cell sizes
for your Array, go to
“Coverage and Capacity Planning” on page 30
.
•
Tx Power
: Shows the transmit power for each IAP.
Summary of Contents for XR-520
Page 2: ......
Page 102: ...Wireless Array 80 Installing the Wireless Array...
Page 112: ...Wireless Array 90 The Web Management Interface...
