Step 5 — Change Array configuration (optional)
15
If a window appears notifying you of a problem with the Array’s security certificate,
click
Continue to this website
for Internet Explorer. For Firefox, click
Add an
exception
(on two consecutive windows) until the
Add Security Exception
window
is displayed. Click
Get Certificate
, and then click
Confirm Security Exception
.
4.
At the login prompt (
), enter the default username
admin
and the password
admin
.
Figure 10. Login Prompt
You are now logged in to the Wi-Fi Array. The WMI is displayed in the browser,
showing the Array Summary page. Note that the Array’s IP address (for the Gigabit
ports) is displayed.
Figure 11. WMI Array Summary
To go to a different page, click its name in the frame on the left. In most cases, this will
display additional choices. The
Status
entries in the left frame display information
about the Array’s operation. The
Configuration
entries allow you to change the
Array’s settings.
You may make any of the changes described in
“Alternative Settings” on page 17
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
