4
Audio Tones
Audio Tone
Headset Status
ingle high tone when pressing
volume button
Volume maximum or minimum
reached
Five rapid high tones, repeated
every 20 seconds
Low battery
No audio indications,
deteriorating audio quality
Out of range
Series of 4 tones, low to high
Audio link open (headset mode).
Active call (hands free mode)
Ring tone
Incoming call
Single high tone
Pairing confirmation
Single low tone
Initiate voice activation
Dual high/low tone
Voice tag not recognized
Single high tone
End call
Series of 4 tones, high to low
Audio link closed (headset mode)
Call ended (hands free mode)
Fast high/low tone every 5
seconds (max & min. volume
confirm beep)
No network/service
No tone
Power ON/OFF
Troubleshooting
When the Bluetooth headset can not connect with the handset. Please do follow operation:
1.
Make sure the Bluetooth headset was turn on and was paired with the handset.
2.
The Bluetooth function was startup.
3.
The distance between handset and Bluetooth headset no over 10M, or there are some stumbling block between the Bluetooth headset and handset like wall or other
electron equipments.
4.
The paired Bluetooth list was full in the message. One Bluetooth headset can be linked up (or "paired") with up to 8 devices. Please pair the headset again when the
paired handsets was full.
Note: When the headset cannot connect with the selected handset automatically. Please use the charger to plug in again or turn off the power and pair it again.
Care and Maintenance
Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will be help your warranty coverage.
*Keep all accessories and enhancements out of the reach of small children.
*Keep the device dry, precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get
wet, remove the battery and allow the device to try completely before replacing it.
* Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
* Do not store the device in hot areas, high temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
*Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit
boards.
*Do not attempt to open the device other than as instructed in this guide.
*Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
*Do not sure harsh chemiosmotic, cleaning solvents, or strong detergents to clean the device.
*Do not paint the device, paint can clog the moving parts and prevent proper operation.
All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.