3
Answering the calling
1. If coming call with ringing then press the MFB Button and receive the call.
2.
If your phone rings the Stereo Bluetooth mutes the music and lets you answer the call with UT-T11S .When the call ends the headset continue the stereo music.
Using your headset:
⑦
Answering
Function
Device Status
Phone
Headset
Action Handsfree Profile
Enter Pairing
Mode
On Off
Press &hold MFB until
LED remains lit. Headset
can be discover by
another Bluetooth device
Make Voice
Dial Call
On in idle
On-
(
Idle
)
Short press MFB, speak
name, phone dials call
Redial a
number
On-voice
dialing turned
on or off
On-
(
Idle
)
Short press MFB 2 times
End a call
On-in call
On-in call
Short press MFB
Function
Device Status
Phone
Headset
Action Handsfree Profile
Receive a call
On-Phone rings
On-rings
Short press MFB(call is
answered)
Reject a call
On-Phone rings
On-rings
Long press MFB
Answer 2
nd
Incoming call
On-in call,2
nd
call coming in
On-in call
Long press MFB places 1
st
call on hold, answers
incoming calll
Choose the
opern
Phone play
music
On-in play
music
Long press VOL+/-
more than or less than 3
seconds
Stereo headset indicator LED
With charger Plugged in
RED light on
Charging in progress
RED light off
Charging complete
With no charger plugged in
No light on
Power off
Power on
(
Blue and red light flash
)
Pairing
mode
3 time rapid flashes
Pairing sucessfully
Flashes at a 3-second interval
seconds ON2.9 seconds OFF)
Standby (not on a call)
Pulses at an 8-second interval(2.0
seconds ON6.0 seconds OFF)
Connected (on a call)
Note: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED
turns off, any button press on the headset, resets the timer and the flashing resumes. If you press the up and down
volume buttons at the same time during a call the pulsing LED turns off for the duration of the call.