Xinje XMP-18 Series Operating Manual Download

Page: 5 / 43

Thank you for purchasing Xinje XP/XMP series integral industrial controller, please read the

manual before operating.

This manual applies to the XP/XMP series integral industrial controller.

Xinje provides user with press document and tele-document:

User CD

Contained software, manual and application examples

Xinje website

Preface

Manual purpose

This manual provides user with the guide of using and operating our product, it

includes the product characteristics, spec explanation, using method, etc.

This manual contains product summarization, exterior layout, PLC program,

and exterior extension.

Summarization: introduce the product characteristics, specs, dimension,

installation.

Exterior layout: introduce the product power spec, in-out layout.

PLC program: introduce how to program in PLC.

HMI picture: introduce how to edit picture in OP.

Exterior extension: introduce extension ability of the product.

Suitable people

This manual aims to below users:

Terminal user

Debugging person

Technology support person

Make sure you have read the safety notice before operating.

Scope

Tele-document

Summary of Contents for XMP-18 Series












































Search results

Summary of Contents for XMP-18 Series

Reviews:

Related manuals for XMP-18 Series

Brands by name

Popular brands

Xinje XMP-18 Series, Operating Manual

Search results

Summary of Contents for XMP-18 Series

Reviews:

Related manuals for XMP-18 Series

Brands by name

Popular brands