Xinje TH465-M, Manual, Page: 42 / 70

6.4 Simulate online
By connecting the PLC and PC, it can read the data from PLC, simulate the operate of TH in touchwin
software. Do not have to download the project into TH, you can control the PLC in your PC. Make sure the
connection is correct between PLC and PC, the com port setting is right.
(1)
connect Xinje PLC with the PC via serial port.
(2) click the to enter simulate online. It will show below message:
It means the simulate online is not registered, you only can use it for 2 hours. If you want to use it longer,
please contact Xinje company to get register number.
(3)
click ok to enter simulate online screen. Right click the screen to show below menu:
l
Log: log on time and history record
l
About: the version information of autowin
l
Com port: the serial port number of your PC which is connected with PLC.
l
Register: register to get user right.
l
Exit: exit the autowin.
If showing the following message, it means the connection between PLC and PC is not good, or the serial
port number is wrong.
In this example, we use TH PLC port and PC serial com port3, so select PLC port com 3.
NOTE: only Xinje PLC support the simulate online function with TH.