XINDAO Multi sport E-ink, Manual

Page: 4 / 86

4
ENGLISH
Compatible with below versions:
Apple Store:
Google Play store:
Support Bluetooth 4.0 iOS 8.0 & above
Android 4.4 and above
Congratulations with your Multi sport E-ink watch! All activities are displayed on the APP after synching with the
data from the wristband. Please read this manual carefully and check the FAQ if needed.
Please note: the screenshots below differs from versions of the APP due updates of the new versions.
1. Specification:
Notice:
IP67 standard means under normal temperature, product could be in 1m deep water last for 30 minutes.
Please pay attention to following two points:
1. IP67 means that it can pass the test of soak 30 min in 1m deep water, but doesn’t mean to swim without being
affected
2. IP67 means that it can keep working under 1 m deep water within 30 min, but doesn’t mean vapor proof, so you
may find the steam in screen after shower, because waterproof standard is based on cold water.
2. Device activate & charger:
1. Charge the watch for 1 hour before using it.
2. Make sure that the watch is full charge in order to work properly. Once the device with low battery status, please
charge the device with the charger. Clamp the charging clip to the 3 point positioned on the back of the watch.
1.28 inch 128*128 pixel E-ink display
Display:
Waterproof:
Charging:
Function:
Dynamic heart rate measurement, sleep monitor, activities reminder, pedometer,
distance, calorie, remote camera control, call remind, SMS notifications from social
media.
IP67 waterproof
3 point connect charge DC 5V/0.5A