Products Information
Sketch Map on CA-1 Front & Rear Panel
IR Sensoer
SLEEP
HEATING
3
4
5
7
8
6
2
1
3
4
5
7
6
2
1
1
3
4
5
7
8
6
2
1
3
4
5
7
6
2
1
3
Signal Input Terminal
RCA terminals are used for signal input.
Balance Signal Input Terminal
The signal is input by balance interconnect cable.
Balance Output Terminal
For connecting with balance input terminal of power
amplifier by balanced interconnect cable.
RCA Output Terminal
For connecting the RCA input terminals on power
amplifier by interconnect cable.
Power Button
For powering on and powering off the product.
Fuse Socket
Fuse socket is used for insert the fuse of the device.
Alternating Current Input Socket
Connect this socket with wall outlet by the attached
power cord.
Warm-up Indicator
The indicator will be lighted when the main power gets
through, then automatically shut off after 60 seconds or
so.
Sleep Indicator
After the power gets through and power on by the
power switch on the rear panel, this indicator will be
light, which indicates this product enter into sleep state.
After press the sleep button to power on the system
main power, this indicator will be dead.
Sleep Button
Press this button, the main system power will be on;
press again, the main system power will be off and enter
to sleep state.
Mute Button
Press the button during work state, the preamplifier will
be in mute mode. Press it again, the product will be
released from mute.
Input Button
The Input channel will be selected circularly from S1-S2-
S3-Bal in order, while press the button once in work
state.
VOL+ Button
Press the button, increase the volume; persist on
pressing, the volume will be increased continually.
VOL- Button
Press the button, decrease the volume; persist on
pressing, the volume will be decreased continually.
Remote Signal Receiving Window
Implement the remote control function by aiming the
remote controller to this window while operation.
