PA-1
FQA
Q.Why operate on the input selector on panel or select switch and volume control button on remote control, there is
no response from amplifier?
A. The reason for that may because: 1. The amplifier is in preparation stage after power on. Please wait. 2. The
amplifier is in mute model, and the Mute mark glitters as 1Hz frequency. Please release the mute;
Q. why the attached remote control can not work?
A. This problem may because: 1. there is no batteries, please take out the batteries attached, open the rear cover of
the remote control by screwdriver and install them according the exploitation on the chapter “Operation and
maintenance for remote control”. 2. The batteries is spent, please replace the batteries. 3. There is barrier between
the IR sensor and infrared emitter. 4. The remote control has been out of the max available operation distance.
Q. Why there is no sound output after power on?
A. That may because: 1. The amplifier has not been connected to sound source or there is no output from sound
source. 2. The amplifier has not been connected to loudspeakers. 3. The signal indication is different with the input
signal, please select the correct signal channel. 4. The volume knob is set at the 0, please set the volume in proper
level.
Q. How to replace the fuse?
A. If the fuse melts, please pull out the power cord at first, then open the fuse socket on the power input socket. After
take out fuse, please check the fuse at first. If there is no black within it, please directly replace it with the fuse in
same specification. If there is fuse, which mean there is serious fault, please contact the xindak dealer.
8
In order to help user operate this amplifier more convenient, following is some frequently asked questions during the
operation. If you want more information, please visit our web site www.xindak.com or send e-mail to [email protected].
How To Use
